Model: CMLA-F8

Product Introduction:

The compact Alpha-F8 linear array loudspeaker is used to form a vertical array. Features a passive external two-way design with two 8" drivers in a dipole arrangement with a 1.4" compression driver with a wave transformer mounted centrally. The precision horn geometry combined with an advanced bass reflective inverted phase hole design creates directivity control of the frequency bandwidth and extends the low frequency output. This high-performance linear array module provides controlled 80° horizontal direction down to 500Hz. Its mechanical and acoustic design ensures a vertical array of up to twenty-four speakers, with vertical inclination adjustable from 0° to 14° accuracy. The speaker can be combined with the Alpha-F1812 speaker to form a vertical array. The speaker cabinet is made of waterproof plywood, impact-resistant and open-air protective paint PCP (Polyurea Box Protective Paint). The front panel of the cabinet is protected by a sturdy metal mesh and lined with waterproof acoustic cotton. Each side panel is fitted with handles. The box is equipped with a three-point lifting device.

Product Specifications

Model: CMLA-S1812

Product Introduction:

The Alpha-S1812 drives an active cardioid subwoofer for a single amplifier channel. The speaker houses two long-stroke neodymium-magnetic drivers with a cardioid setting, a 18" driver facing forward in the LF reflector and a 12" two-chamber beltpass design driver facing backwards. The cardioid diffusion pattern produced by this configuration avoids energy radiating to the rear of the system, providing extremely high low-frequency reproduction accuracy and reducing energy loss in excess areas. The Alpha-S1812 is fitted with a three-point hoisting device that can be completely hoisted vertically with the Alpha-F8 full-range speaker array, hoisted on top of the Alpha-F8 speaker array, or used for ground stacking. The speaker can form a vertical array with the Alpha-F8 speaker. The speaker cabinet is made of waterproof plywood, impact resistant and open-air protective paint PCP (polyurea box protective paint). The front panel of the cabinet is protected by a sturdy metal mesh and lined with waterproof acoustic cotton, and the side panels are fixed with four handles.

Product Specifications

Combo chart